Swing over bed |
|
Max. cutting length |
350 mm |
Max. cutting dia. |
250 mm |
Swing over slide |
250 mm |
Main spindle bore |
A2-8 |
Dia. in front bearing of main-spindle |
1:20 |
Main-spindle bore |
75 mm |
Max. speed of main-spindle |
4500 r/min |
Max. output torque of main-spindle |
281 Nm |
Speed range of main-spindle |
Variable |
Output power of sub-spindle |
17.7 kW |
Standard chuck Dia. of turret |
10" inch |
Sub-spindle bore |
A2-5 |
Dia. in front bearing of sub-spindle |
Morse No.5 |
Sub-spindle bore |
35 mm |
Max. speed of sub-spindle |
6000 r/min |
Max. output torque of sub-spindle |
83 Nm |
Speed range of sub-spindle |
Variable |
Output power of sub-spindle |
13 kW |
Standard chuck Dia. of turret |
6" inech |
X/Z/W axis rapid speed |
30/30/20 m/min |
X/Z/W/Y axis strok |
195/530/530/±40 |
Mode of rurret |
Horizontal 12 stations |
Turret indexing time (including positioning and clamping) |
0.34 S |
Machining accuracy |
IT5-IT6 |
Surface roughness of workpiece machined |
Ra0.8μm |
Dia. of end face of rurret |
270 mm |
Tool size Ex-cycle tool |
20×20×100 mm |
Dia. of shark of boring tool |
φ32 mm |
Selection of neighboring tool |
Posssible |
Max. weight of workpiece |
|
Disc-shaped workpiece |
30 kg |
Shaft-shaped workpiece |
60 kg |
Overall weight of machine |
5500 kg |
Center height (from bottom of bed) |
1074 mm |
Over dimension L×W×H |
3250×2010×2190 mm |
 |
