Swing over bed φ610 mm(24") Swing over carriage φ370 mm(14 9/16") Swing over gap×Width in gap φ830mm(32 2/3") ×210mm Distance between centers 750/1000/1500/2000/3000 mm(29"/40"/60"/118") Width of bed and hardness 400 mm(15 19/25”) and RC52 Section of turning tool 25×25 mm SPINDLE Spindle speed range B 10-1400 r/min(24 kinds) C 14-1250 r/min(24 kinds) Spindle bore & nose B φ80 mm(3 9/64”) D8 C φ104 mm D11 Taper in front spindle B φ90 mm(1:20) C φ120 mm FEEDS No. of feeds 64 kinds Range of longitudinal Normal 0.11-1.6 mm/r Fine 0.028-0.11 mm/r Coarse 1.76-6.4 mm/r Metric thread range 1-192 mm(44 kinds) Whitworth thread range 1/2-24 t.p.i(28 )kinds Module thread range 0.25-48(module)(39 kinds) Diametral pitch thread range 1/2-96 D.P.(38kinds) Long. rapid traverse 4 m/min Cross slide travel 420 mm(16 4/25") Compund rest slide travel 140 mm(5 1/2") TAILSTOCK Center sleeve travel of it 150 mm(5 29/32") Dia. of center sleeve of it φ75 mm(2 61/64") Spindle bore taper of it Morse No.5 Main motor 7.5 kW(10 HP) Net weigh/Gross weight 750mm 2180/3000 kg 1000mm 2260/3200 kg 1500mm 2437/3400 kg 2000mm 2787/3800 kg 3000mm 3287/ Overall/Gross dimensions 750mm 2418×1130×1367/2600×1620×2010 1000mm 2668×1130×1367/2850×1620×2010 1500mm 3168×1130×1367/3350×1620×2010 2000mm 3668×1130×1367/3850×1620×2010 3000mm 4668×1130×1367/